The Joinery Bench Part III : Apron Assembly

I could not wait for the votes so I am doing the apron with dovetails. You can use dowels, box joints, or even just simple miters. The objective is to run the front apron across your width ( which should be roughly 36") and return your sides along the depth of the top and beyond to 24".Then directly behind and attatched to the top is the fourth wall of the tool tray, just cut to fit in between the two 24" sides and fasten from the outside with your method of choice. ( Those I will dowel peg in)

So here are some pics of some of (one) the dovetailling and where the mid apron for the tool tray intersects!